G.J. Nikolas & Co.

Nikolas 12407 Eco-Thane Water Based Lacquer(Gallon)

#12407 Eco-Thane is a water based self-cross linking urethane coating. It is designed to provide a high degree of chemical toughness and exterior durability(Gallon)  

Nikolas Lacquer De-Odorizer

Nikolas OE.3 De-odorizer can be used any place where paint leaves odor. Product may beadded to water or solvent based paints.

Nikolas 12335 Iron Coat Lacquer RFU(Case of 12 qts.)

Nikolas Lacquer #12335 OD Iron Coat RTU (12 Quarts per case)

Nikolas 12164 Fast Drying Outdoor Lacquer RFU(Case of 12 qts.)

Nikolas #12164 Fast Drying Outdoor Lacquer RFU is commonly used for exterior brass and bronze refinishing, signage(12 Quarts per case)

Nikolas 15440 Wipe-On Alumaseal Lacquer(Gallon)

    #15440 Wipe-on Alumaseal is a clear wipe on protective coating designed for exterior aluminum. (Gallon)  

Nikolas 11960 Wipe-On Alumaseal Lacquer(Case of 12 qts.)

  #11960 Wipe-on Alumaseal is a clear wipe on protective coating designed for exterior aluminum. (12 Quarts per case)

Nikolas 15200 Quick Sliver Lacquer (Sold by a case of 4 gallons)

QuickSilver is the ideal choice for architectural metal maintenance(12 Quarts per case)

Nikolas Lacquer 6574 Clear Epoxy Primer(Case of 12 qts.)

 

Nikolas Lacquer #8 Retarder (12 quarts per case)

Use during worst humidity (when moisture condenses on interior concrete(Quart)

Nikolas Lacquer Flattener(Qt.)

Nikolas Flat Ayd is a liquid silicate flattener used to alter the gloss of coatings. This material is available in both conventional and low VOC forms. Flat Ayd can easily be stirred into a coating to vary the sheen from gloss down to a dead flat and...

Nikolas Die Color - Lemon Yellow(Pint)

Lemon Yellow Color - Nikolas Dye Colors are concentrated liquid dyes that can be blended with clear coatings. The result is a transparent colored coating, which fully reveals the surface finish of the base metal.(Pint)

Nikolas Die Color - Special Gold(Pint)

Special Gold Color - Nikolas Dye Colors are concentrated liquid dyes that can be blended with clear coatings. The result is a transparent colored coating, which fully reveals the surface finish of the base metal.(Pint)