Product Description
DuPont StoneTech Polishing Powder
1500 Grit
10 LB Bucket
Features + Benefits
- Creates smooth, satin finish
- Eliminates etch marks & light wear patterns
- Non-acidic
Where to Use
Natural stone such as marble, limestone, travertine & terrazzo.
Directions
Always test in a small inconspicuous area to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings.
- If surface is heavily soiled, pre-clean with KlenzAll if needed.
- Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
- If using Polishing Powder following the use of Honing Powder products, insure that the surface is well rinsed and a new pad is used.
- Apply approximately 1/2 cup Polishing Powder plus 1 cup clean water to stone surface.
- Refinish using a hand orbital sander or weighted floor machine at 130-140 lbs., 175 rpm, fitted with a natural hair pad.
- Keep compound wet while refinishing with plenty of water. Add Polishing Powder as needed.
- Refinish area until the desired level of polish has been achieved.
- For a highly polished finish follow with Shining Powder.
- Rinse well and use a wet vacuum or hot water extraction unit to remove all remaining compound.
Available Sizes (and Coverage)
- 10 lb Bucket: 500-1,000 sq. ft. per pound.
If you have any questions about this product, please feel free to contact:info@tripointpro.com
